A: 4-1/4"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 5"; Efficiency: 35.0%; Enclosure: OAO; F/L Amps: 2.40; HP: 1/20; Hz: 60; Insulation Class: A; Mfg. #: 610; Mounting: Thru-bolt; NEMA Frame: 42Y; Phase: Single; Rot.: CWSE; RPM: 1550; Service Factor: 1.00; Shaft Diam.: 3/8"; Shaft Length: 3-1/4"; Speeds: 1; Std. Mount. Pos.: All Angle; Thermal Protection: Auto; Type: Shaded Pole; Volts: 115/230; Wt. Lbs.: 6.8;
| Store | Status |
| Login above to see availability | |
A: 4-1/4"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 5"; Efficiency: 35.0%; Enclosure: OAO; F/L Amps: 2.40; HP: 1/20; Hz: 60; Insulation Class: A; Mfg. #: 610; Mounting: Thru-bolt; NEMA Frame: 42Y; Phase: Single; Rot.: CWSE; RPM: 1550; Service Factor: 1.00; Shaft Diam.: 3/8"; Shaft Length: 3-1/4"; Speeds: 1; Std. Mount. Pos.: All Angle; Thermal Protection: Auto; Type: Shaded Pole; Volts: 115/230; Wt. Lbs.: 6.8;
Unit cooler fans and blowers, refrigeration cabinets, unit heaters, space heaters, remote air conditioners blower units and other air moving applications |Replaces many commercial condensing units (Copeland, Tecumseh, Hussmann and Tyler, etc.)
42Y frame. mechanically reversible, drain holes, holes provided for conduit connector |Shaded pole, all-angle sleeve bearing, thermally protected |4 tapped 10-32 holes for shaft end mounting |Use S58-847 mounting studs, 4 per set, sold separately
| F/L Amps | 2.40 |
| Phase | Single |
| Type | Shaded Pole |
| Shaft Length | 3-1/4" |
| Diameter | 5" |
| Rot. | CWSE |
| Applications | Unit cooler fans and blowers, refrigeration cabinets, unit heaters, space heaters, remote air conditioners blower units and other air moving applications |Replaces many commercial condensing units (Copeland, Tecumseh, Hussmann and Tyler, etc.) |
| Efficiency | 35.0% |
| A | 4-1/4" |
| Enclosure | OAO |
| Speeds | 1 |
| Bearing Type | Slv |
| Thermal Protection | Auto |
| HP | 1/20 |
| Wt. Lbs. | 6.8 |
| Mounting | Thru-bolt |
| Insulation Class | A |
| Volts | 115/230 |
| Shaft Diam. | 3/8" |
| RPM | 1550 |
| Features | 42Y frame. mechanically reversible, drain holes, holes provided for conduit connector |Shaded pole, all-angle sleeve bearing, thermally protected |4 tapped 10-32 holes for shaft end mounting |Use S58-847 mounting studs, 4 per set, sold separately |
| NEMA Frame | 42Y |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 7.00 |
| Shipping Width | 6.88 |
| Shipping Length | 13.50 |
| Shipping Height | 6.63 |
| Harmonize Code | 8501.10.6020 |
See catalog page 11 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: 610
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
