A: 4"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 4-5/16"; Efficiency: 35.0%; Enclosure: OAO; F/L Amps: 2.20; HP: 1/10; Hz: 60; Insulation Class: A; Mfg. #: 309; Mounting: Thru-bolt; Phase: Single; Rot.: CCWSE; RPM: 850; Service Factor: 1.00; Shaft Diam.: 3/8"; Shaft Length: 2-1/2"; Speeds: 1; Std. Mount. Pos.: All Angle; Thermal Protection: Auto; Type: Shaded Pole; Volts: 230; Wt. Lbs.: 8.3;
| Store | Status |
| Login above to see availability | |
A: 4"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 4-5/16"; Efficiency: 35.0%; Enclosure: OAO; F/L Amps: 2.20; HP: 1/10; Hz: 60; Insulation Class: A; Mfg. #: 309; Mounting: Thru-bolt; Phase: Single; Rot.: CCWSE; RPM: 850; Service Factor: 1.00; Shaft Diam.: 3/8"; Shaft Length: 2-1/2"; Speeds: 1; Std. Mount. Pos.: All Angle; Thermal Protection: Auto; Type: Shaded Pole; Volts: 230; Wt. Lbs.: 8.3;
For most “Slurpee” machines manufactured by Taylor
All-angle sleeve bearings, automatic thermal overload protection |Open design, shaded pole, no mounting rings
| F/L Amps | 2.20 |
| Phase | Single |
| Type | Shaded Pole |
| Shaft Length | 2-1/2" |
| Diameter | 4-5/16" |
| Rot. | CCWSE |
| Applications | For most “Slurpee” machines manufactured by Taylor |
| Efficiency | 35.0% |
| A | 4" |
| Enclosure | OAO |
| Speeds | 1 |
| Bearing Type | Slv |
| Thermal Protection | Auto |
| HP | 1/10 |
| Wt. Lbs. | 8.3 |
| Mounting | Thru-bolt |
| Insulation Class | A |
| Volts | 230 |
| Shaft Diam. | 3/8" |
| RPM | 850 |
| Features | All-angle sleeve bearings, automatic thermal overload protection |Open design, shaded pole, no mounting rings |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 8.15 |
| Shipping Width | 5.60 |
| Shipping Length | 12.00 |
| Shipping Height | 5.30 |
| Harmonize Code | 8501.40.2040 |
See catalog page 51 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: 309
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
