A: 3-3/8"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 5"; Efficiency: 35.0%; Enclosure: OPEN; F/L Amps: 4.4; HP: 1/8-1/15; Hz: 60; Insulation Class: A; Mfg. #: D1010; Mounting: Thru-bolt; NEMA Frame: 42; Phase: Single; Rot.: Dbl. Shaft; RPM: 1050; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 3-1/3" x 2-3/4"; Speeds: 3; Thermal Protection: Yes; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 8.6;
| Store | Status |
| Login above to see availability | |
A: 3-3/8"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 5"; Efficiency: 35.0%; Enclosure: OPEN; F/L Amps: 4.4; HP: 1/8-1/15; Hz: 60; Insulation Class: A; Mfg. #: D1010; Mounting: Thru-bolt; NEMA Frame: 42; Phase: Single; Rot.: Dbl. Shaft; RPM: 1050; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 3-1/3" x 2-3/4"; Speeds: 3; Thermal Protection: Yes; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 8.6;
Replaces Fedders models listed: |S88-077 replaces #S196-42-1 and S196-161-3 |S88-249 replaces #S196-20-2
Thermally protected; leads, studs and dimensions match original|Shaded pole
| F/L Amps | 4.4 |
| Phase | Single |
| Type | Shaded Pole |
| Shaft Length | 3-1/3" x 2-3/4" |
| Diameter | 5" |
| Rot. | Dbl. Shaft |
| Applications | Replaces Fedders models listed: |S88-077 replaces #S196-42-1 and S196-161-3 |S88-249 replaces #S196-20-2 |
| Efficiency | 35.0% |
| A | 3-3/8" |
| Enclosure | OPEN |
| Speeds | 3 |
| Bearing Type | Slv |
| Thermal Protection | Yes |
| HP | 1/8-1/15 |
| Wt. Lbs. | 8.6 |
| Mounting | Thru-bolt |
| Insulation Class | A |
| Volts | 115 |
| Shaft Diam. | 1/2" |
| RPM | 1050 |
| Features | Thermally protected; leads, studs and dimensions match original|Shaded pole |
| NEMA Frame | 42 |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 8.85 |
| Shipping Width | 5.40 |
| Shipping Length | 10.90 |
| Shipping Height | 5.30 |
| Harmonize Code | 8501.40.3040 |
See catalog page 89 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: D1010
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
