A: 3-1/4"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 5"; Enclosure: OPEN; F/L Amps: 3.60; HP: 1/10-1/50; Hz: 60; Insulation Class: A; Mfg. #: D293; Mounting: Resilient; NEMA Frame: 42; Phase: Single; R: 4-1/8"; Rot.: Dbl. Shaft; RPM: 1050; Service Factor: 1.00; Shaft Diam.: 3/8"; Shaft Length: 10-3/4"; Speeds: 5; Thermal Protection: Yes; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 8.0;
| Store | Status |
| Login above to see availability | |
A: 3-1/4"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 5"; Enclosure: OPEN; F/L Amps: 3.60; HP: 1/10-1/50; Hz: 60; Insulation Class: A; Mfg. #: D293; Mounting: Resilient; NEMA Frame: 42; Phase: Single; R: 4-1/8"; Rot.: Dbl. Shaft; RPM: 1050; Service Factor: 1.00; Shaft Diam.: 3/8"; Shaft Length: 10-3/4"; Speeds: 5; Thermal Protection: Yes; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 8.0;
Used in motels, hotels, offices and hospitals where a central system pumps hot or cold water or refrigerants to remote console type units |Highly versatile, easily modified to replace the original equipment motor, and will closely match the original’s performance
Thermally protected |Shaft: same length on both ends, height is 3-1/2" |Resilient rings: 2-1/2" diameter supplied on base, which comes with S87-406 and S87-423
| F/L Amps | 3.60 |
| Phase | Single |
| Type | Shaded Pole |
| Shaft Length | 10-3/4" |
| Diameter | 5" |
| Rot. | Dbl. Shaft |
| Applications | Used in motels, hotels, offices and hospitals where a central system pumps hot or cold water or refrigerants to remote console type units |Highly versatile, easily modified to replace the original equipment motor, and will closely match the original’s performance |
| A | 3-1/4" |
| Enclosure | OPEN |
| Speeds | 5 |
| Bearing Type | Slv |
| Thermal Protection | Yes |
| HP | 1/10-1/50 |
| Wt. Lbs. | 8.0 |
| Mounting | Resilient |
| Insulation Class | A |
| Volts | 115 |
| Shaft Diam. | 3/8" |
| RPM | 1050 |
| Features | Thermally protected |Shaft: same length on both ends, height is 3-1/2" |Resilient rings: 2-1/2" diameter supplied on base, which comes with S87-406 and S87-423 |
| R | 4-1/8" |
| NEMA Frame | 42 |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 7.00 |
| Shipping Width | 6.40 |
| Shipping Length | 5.50 |
| Shipping Height | 24.00 |
| Harmonize Code | 8501.40.3040 |
See catalog page 44 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: D293
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
