A: 3-3/8"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 4-7/16"; Efficiency: 35.0%; Enclosure: OPEN; F/L Amps: 3.50; HP: 1/10-1/25; Hz: 60; Insulation Class: A; Mfg. #: D236; Mounting: Resilient; Phase: Single; R: 4-3/16"; Rot.: Dbl. Shaft; RPM: 1550; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 7-1/2"; Speeds: 3; Thermal Protection: Yes; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 6.9;
| Store | Status |
| Login above to see availability | |
A: 3-3/8"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 4-7/16"; Efficiency: 35.0%; Enclosure: OPEN; F/L Amps: 3.50; HP: 1/10-1/25; Hz: 60; Insulation Class: A; Mfg. #: D236; Mounting: Resilient; Phase: Single; R: 4-3/16"; Rot.: Dbl. Shaft; RPM: 1550; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 7-1/2"; Speeds: 3; Thermal Protection: Yes; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 6.9;
Used in hotels, motels, offices and hospitals where a central system pumps hot or cold water or refrigerants to remote units |This line is unusually broad to provide replacements with a minimum of modification and at the same time closely match performance of the original motor
Multiple-speed, shaded pole, thermally protected |Leads: 60" long for S88-109 and S88-110; 30" long for S88-111 |Shaft: flatted both ends; resilient rings: 2-1/2" diameter, supplied|Shaft length is the same on both ends
| F/L Amps | 3.50 |
| Phase | Single |
| Type | Shaded Pole |
| Shaft Length | 7-1/2" |
| Diameter | 4-7/16" |
| Rot. | Dbl. Shaft |
| Applications | Used in hotels, motels, offices and hospitals where a central system pumps hot or cold water or refrigerants to remote units |This line is unusually broad to provide replacements with a minimum of modification and at the same time closely match performance of the original motor |
| Efficiency | 35.0% |
| A | 3-3/8" |
| Enclosure | OPEN |
| Speeds | 3 |
| Bearing Type | Slv |
| Thermal Protection | Yes |
| HP | 1/10-1/25 |
| Wt. Lbs. | 6.9 |
| Mounting | Resilient |
| Insulation Class | A |
| Volts | 115 |
| Shaft Diam. | 1/2" |
| RPM | 1550 |
| Features | Multiple-speed, shaded pole, thermally protected |Leads: 60" long for S88-109 and S88-110; 30" long for S88-111 |Shaft: flatted both ends; resilient rings: 2-1/2" diameter, supplied|Shaft length is the same on both ends |
| R | 4-3/16" |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 7.45 |
| Shipping Width | 4.80 |
| Shipping Length | 20.80 |
| Shipping Height | 4.60 |
| Harmonize Code | 8501.40.3040 |
See catalog page 41 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: D236
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
