A: 3-3/4"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Ball; Diameter: 4-2/5"; Efficiency: 35.0%; Enclosure: OPEN; F/L Amps: 2.90; HP: 1/11-1/35; Hz: 60; Insulation Class: B; Mfg. #: D119; Mounting: Thru-bolt; Phase: Single; Rot.: CCWSE; RPM: 1500; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 2-5/8"; Speeds: 3; Thermal Protection: Yes; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 6.0;
| Store | Status |
| Login above to see availability | |
A: 3-3/4"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Ball; Diameter: 4-2/5"; Efficiency: 35.0%; Enclosure: OPEN; F/L Amps: 2.90; HP: 1/11-1/35; Hz: 60; Insulation Class: B; Mfg. #: D119; Mounting: Thru-bolt; Phase: Single; Rot.: CCWSE; RPM: 1500; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 2-5/8"; Speeds: 3; Thermal Protection: Yes; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 6.0;
Replacements for motors used on roof ventilators, may also be used on fan and blower applications where the motor is located in the air system
Thermally protected, shaded pole, 60 Hz |Shafts: flatted |Studs: four studs on 3.89" centers, shaft end, 1/2" long all motors |S89-442 is a replacement for Leslie Locke #7108-5056
| F/L Amps | 2.90 |
| Phase | Single |
| Type | Shaded Pole |
| Shaft Length | 2-5/8" |
| Diameter | 4-2/5" |
| Rot. | CCWSE |
| Applications | Replacements for motors used on roof ventilators, may also be used on fan and blower applications where the motor is located in the air system |
| Efficiency | 35.0% |
| A | 3-3/4" |
| Enclosure | OPEN |
| Speeds | 3 |
| Bearing Type | Ball |
| Thermal Protection | Yes |
| HP | 1/11-1/35 |
| Wt. Lbs. | 6.0 |
| Mounting | Thru-bolt |
| Insulation Class | B |
| Volts | 115 |
| Shaft Diam. | 1/2" |
| RPM | 1500 |
| Features | Thermally protected, shaded pole, 60 Hz |Shafts: flatted |Studs: four studs on 3.89" centers, shaft end, 1/2" long all motors |S89-442 is a replacement for Leslie Locke #7108-5056 |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 6.60 |
| Shipping Width | 4.70 |
| Shipping Length | 10.90 |
| Shipping Height | 4.70 |
| Harmonize Code | 8501.40.3040 |
See catalog page 10 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: D119
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
