A: 3-5/8"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 3-3/8"; Efficiency: 35.0%; Enclosure: AO; F/L Amps: 1.10; HP: 1/30; Hz: 60; Insulation Class: B; Mfg. #: D208; Mounting: Thru-bolt; Phase: Single; Rot.: CWSE; RPM: 3000; Service Factor: 1.00; Shaft Diam.: 1/4"; Shaft Length: 3"; Speeds: 1; Thermal Protection: Yes; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 3.0;
| Store | Status |
| Login above to see availability | |
A: 3-5/8"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 3-3/8"; Efficiency: 35.0%; Enclosure: AO; F/L Amps: 1.10; HP: 1/30; Hz: 60; Insulation Class: B; Mfg. #: D208; Mounting: Thru-bolt; Phase: Single; Rot.: CWSE; RPM: 3000; Service Factor: 1.00; Shaft Diam.: 1/4"; Shaft Length: 3"; Speeds: 1; Thermal Protection: Yes; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 3.0;
For use on fans, blowers and small pumps where motor is isolated from air stream
Continuous duty |Studs: four on 2.84" centers, #8-32 thread |Sleeve bearing, thermal overload protection |Shaded pole, open construction
| F/L Amps | 1.10 |
| Phase | Single |
| Type | Shaded Pole |
| Shaft Length | 3" |
| Diameter | 3-3/8" |
| Rot. | CWSE |
| Applications | For use on fans, blowers and small pumps where motor is isolated from air stream |
| Efficiency | 35.0% |
| A | 3-5/8" |
| Enclosure | AO |
| Speeds | 1 |
| Bearing Type | Slv |
| Thermal Protection | Yes |
| HP | 1/30 |
| Wt. Lbs. | 3.0 |
| Mounting | Thru-bolt |
| Insulation Class | B |
| Volts | 115 |
| Shaft Diam. | 1/4" |
| RPM | 3000 |
| Features | Continuous duty |Studs: four on 2.84" centers, #8-32 thread |Sleeve bearing, thermal overload protection |Shaded pole, open construction |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 2.75 |
| Shipping Width | 3.80 |
| Shipping Length | 8.70 |
| Shipping Height | 3.80 |
| Harmonize Code | 8501.10.3000 |
| Note | S58-701 has four studs opposite shaft end; S58-786 is double shaft with 3-1/4" extension each end. |
See catalog page 9 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: D208
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
