A: 5"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 60; Bearing Type: Ball; Capacitor to Match: G21-891; Diameter: 5-5/8"; Efficiency: 65.0%; Enclosure: OPEN; F/L Amps: 4.1; HP: 1/2; Hz: 60; Insulation Class: B; Mfg. #: D935; Mounting: Thru-bolt; NEMA Frame: 48; Phase: Single; Rot.: Rev.; RPM: 1075; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 6-1/2"; Speeds: 1; Thermal Protection: Yes; Type: PSC; Volts: 208-230; Wt. Lbs.: 16.0;
| Store | Status |
| Login above to see availability | |
A: 5"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 60; Bearing Type: Ball; Capacitor to Match: G21-891; Diameter: 5-5/8"; Efficiency: 65.0%; Enclosure: OPEN; F/L Amps: 4.1; HP: 1/2; Hz: 60; Insulation Class: B; Mfg. #: D935; Mounting: Thru-bolt; NEMA Frame: 48; Phase: Single; Rot.: Rev.; RPM: 1075; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 6-1/2"; Speeds: 1; Thermal Protection: Yes; Type: PSC; Volts: 208-230; Wt. Lbs.: 16.0;
Used for vertical or horizontal shaft applications where the motor is located in the airstream
PSC, 208-230V, open, air over |S89-578, S89-579 and S89-580 closed on shaft end, open on opposite shaft end |Thermally protected |Capacitor not included
| Capacitor to Match | G21-891 |
| F/L Amps | 4.1 |
| Phase | Single |
| Type | PSC |
| Shaft Length | 6-1/2" |
| Rot. | Rev. |
| Diameter | 5-5/8" |
| Applications | Used for vertical or horizontal shaft applications where the motor is located in the airstream |
| Efficiency | 65.0% |
| A | 5" |
| Enclosure | OPEN |
| Speeds | 1 |
| Bearing Type | Ball |
| Thermal Protection | Yes |
| HP | 1/2 |
| Wt. Lbs. | 16.0 |
| Mounting | Thru-bolt |
| Insulation Class | B |
| Volts | 208-230 |
| Shaft Diam. | 1/2" |
| RPM | 1075 |
| Features | PSC, 208-230V, open, air over |S89-578, S89-579 and S89-580 closed on shaft end, open on opposite shaft end |Thermally protected |Capacitor not included |
| NEMA Frame | 48 |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 16.85 |
| Shipping Width | 15.90 |
| Shipping Length | 6.00 |
| Shipping Height | 6.00 |
| Harmonize Code | 8501.40.3040 |
See catalog page 30 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: D935
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
