Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Ball; Diameter: 6-3/10"; Enclosure: DP; F/L Amps: 8.0; HP: 1/2-1/6; Hz: 60; Insulation Class: B; Mfg. #: H175; Mounting: Resilient; NEMA Frame: 56; Phase: Single; Rot.: Rev.; RPM: 1725; Service Factor: 1.25; Shaft Diam.: 5/8"; Shaft Length: 1-7/8"; Speeds: 2; Std. Mount. Pos.: All Angle; Thermal Protection: None; Type: Split-Phase; Volts: 115; Wt. Lbs.: 31.0;
| Store | Status |
| Login above to see availability | |
Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Ball; Diameter: 6-3/10"; Enclosure: DP; F/L Amps: 8.0; HP: 1/2-1/6; Hz: 60; Insulation Class: B; Mfg. #: H175; Mounting: Resilient; NEMA Frame: 56; Phase: Single; Rot.: Rev.; RPM: 1725; Service Factor: 1.25; Shaft Diam.: 5/8"; Shaft Length: 1-7/8"; Speeds: 2; Std. Mount. Pos.: All Angle; Thermal Protection: None; Type: Split-Phase; Volts: 115; Wt. Lbs.: 31.0;
Commercial fans, blowers and evaporative coolers having moderate starting loads or loads applied after the motor is up to speed
Extended through bolts |No thermal protection |NEMA Service Factor |Resilient base
| F/L Amps | 8.0 |
| Phase | Single |
| Type | Split-Phase |
| Shaft Length | 1-7/8" |
| Diameter | 6-3/10" |
| Rot. | Rev. |
| Applications | Commercial fans, blowers and evaporative coolers having moderate starting loads or loads applied after the motor is up to speed |
| Enclosure | DP |
| Speeds | 2 |
| Bearing Type | Ball |
| Thermal Protection | None |
| HP | 1/2-1/6 |
| Wt. Lbs. | 31.0 |
| Mounting | Resilient |
| Insulation Class | B |
| Volts | 115 |
| Shaft Diam. | 5/8" |
| RPM | 1725 |
| Features | Extended through bolts |No thermal protection |NEMA Service Factor |Resilient base |
| NEMA Frame | 56 |
| Service Factor | 1.25 |
| Hz | 60 |
| Shipping Weight | 28.00 |
| Shipping Width | 7.50 |
| Shipping Length | 13.50 |
| Shipping Height | 8.00 |
| Harmonize Code | 8501403040 |
See catalog page 117 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: H175
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
