A: 2-3/8"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 3-3/8"; Efficiency: 35.0%; Enclosure: TEAO; F/L Amps: 0.75; HP: 1/60; Hz: 60; Insulation Class: A; Mfg. #: D402; Mounting: Thru-bolt; Phase: Single; Rot.: CWSE; RPM: 3000; Service Factor: 1.00; Shaft Diam.: 1/4"; Shaft Length: 1-3/4"; Speeds: 1; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 2.5;
| Store | Status |
| Login above to see availability | |
A: 2-3/8"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 3-3/8"; Efficiency: 35.0%; Enclosure: TEAO; F/L Amps: 0.75; HP: 1/60; Hz: 60; Insulation Class: A; Mfg. #: D402; Mounting: Thru-bolt; Phase: Single; Rot.: CWSE; RPM: 3000; Service Factor: 1.00; Shaft Diam.: 1/4"; Shaft Length: 1-3/4"; Speeds: 1; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 2.5;
Replacements on many range hood vent fans or blowers and may be used for other applications where the motor is located in the airstream
Thermally protected |60 Hz |Shaft: flatted |Studs: four each end, 3/4" long on 2.84" centers
| F/L Amps | 0.75 |
| Phase | Single |
| Type | Shaded Pole |
| Shaft Length | 1-3/4" |
| Diameter | 3-3/8" |
| Rot. | CWSE |
| Applications | Replacements on many range hood vent fans or blowers and may be used for other applications where the motor is located in the airstream |
| Efficiency | 35.0% |
| A | 2-3/8" |
| Enclosure | TEAO |
| Speeds | 1 |
| Bearing Type | Slv |
| HP | 1/60 |
| Wt. Lbs. | 2.5 |
| Mounting | Thru-bolt |
| Insulation Class | A |
| Volts | 115 |
| Shaft Diam. | 1/4" |
| RPM | 3000 |
| Features | Thermally protected |60 Hz |Shaft: flatted |Studs: four each end, 3/4" long on 2.84" centers |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 2.15 |
| Shipping Width | 3.70 |
| Shipping Length | 8.70 |
| Shipping Height | 3.70 |
| Harmonize Code | 8501.10.3000 |
See catalog page 8 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: D402
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
