A: 4"; Agency Certification: UR/CSA; Bearing Type: Slv; Diameter: 5"; Efficiency: 35.0%; Enclosure: OAO; F/L Amps: 6.60; HP: 1/6; Hz: 60; Insulation Class: B; Mfg. #: 40849; Mounting: Resilient; NEMA Frame: 42; Phase: Single; Rot.: CWSE; RPM: 1050; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 3-3/4"; Speeds: 1; Std. Mount. Pos.: Horizontal Only; Thermal Protection: Auto; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 11.0;
| Store | Status |
| Login above to see availability | |
A: 4"; Agency Certification: UR/CSA; Bearing Type: Slv; Diameter: 5"; Efficiency: 35.0%; Enclosure: OAO; F/L Amps: 6.60; HP: 1/6; Hz: 60; Insulation Class: B; Mfg. #: 40849; Mounting: Resilient; NEMA Frame: 42; Phase: Single; Rot.: CWSE; RPM: 1050; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 3-3/4"; Speeds: 1; Std. Mount. Pos.: Horizontal Only; Thermal Protection: Auto; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 11.0;
Mobile home and travel trailer furnaces, unit heaters, ventilators, fans and blowers |Replacement blower motors for Coleman, Intertherm, Duotherm, Lennox, Janitrol, etc., furnaces and heaters used for mobile homes, campers and travel trailers
Thermally protected, flatted shafts |S87-422 has two studs on 4-5/8" centers, 15/32" long, #8-32 thread on opposite shaft end |S87-404 replaces Coleman furnace models #8635, 8645,8655, 8665, 8670, 8845, 8855, 8865 and Air Circular model #8870 |S87-404 has #8-32 tapped holes in the case O.D. for additional mounting |S88-298 is supplied with a long cord and plug |S87-408 has resilient mounting rings included
| F/L Amps | 6.60 |
| Phase | Single |
| Type | Shaded Pole |
| Shaft Length | 3-3/4" |
| Rot. | CWSE |
| Diameter | 5" |
| Applications | Mobile home and travel trailer furnaces, unit heaters, ventilators, fans and blowers |Replacement blower motors for Coleman, Intertherm, Duotherm, Lennox, Janitrol, etc., furnaces and heaters used for mobile homes, campers and travel trailers |
| Efficiency | 35.0% |
| A | 4" |
| Speeds | 1 |
| Enclosure | OAO |
| Bearing Type | Slv |
| HP | 1/6 |
| Thermal Protection | Auto |
| Wt. Lbs. | 11.0 |
| Mounting | Resilient |
| Insulation Class | B |
| Volts | 115 |
| Shaft Diam. | 1/2" |
| RPM | 1050 |
| Features | Thermally protected, flatted shafts |S87-422 has two studs on 4-5/8" centers, 15/32" long, #8-32 thread on opposite shaft end |S87-404 replaces Coleman furnace models #8635, 8645,8655, 8665, 8670, 8845, 8855, 8865 and Air Circular model #8870 |S87-404 has #8-32 tapped holes in the case O.D. for additional mounting |S88-298 is supplied with a long cord and plug |S87-408 has resilient mounting rings included |
| NEMA Frame | 42 |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 9.45 |
| Shipping Width | 5.90 |
| Shipping Length | 12.40 |
| Shipping Height | 5.90 |
| Harmonize Code | 8501.4 |
See catalog page 55 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: 40849
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
