A: 4-1/4"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 3-3/8"; Efficiency: 35.0%; Enclosure: TEFC; F/L Amps: 1.60; HP: 1/25; Hz: 60; Insulation Class: B; Mfg. #: D134; Mounting: Thru-bolt; Phase: Single; Rot.: CWSE; RPM: 1500; Service Factor: 1.00; Shaft Diam.: 5/16"; Shaft Length: 2-1/4"; Speeds: 1; Thermal Protection: Yes; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 4.1;
| Store | Status |
| Login above to see availability | |
A: 4-1/4"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 3-3/8"; Efficiency: 35.0%; Enclosure: TEFC; F/L Amps: 1.60; HP: 1/25; Hz: 60; Insulation Class: B; Mfg. #: D134; Mounting: Thru-bolt; Phase: Single; Rot.: CWSE; RPM: 1500; Service Factor: 1.00; Shaft Diam.: 5/16"; Shaft Length: 2-1/4"; Speeds: 1; Thermal Protection: Yes; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 4.1;
Central heating and direct drive blower units in humid or dusty areas
Shaded pole, thermally protected |Shaft: flatted |Cooling case may be removed if necessary to use as totally enclosed motor|Studs: four, 3/4" long on 2.84" centers, #8-32 thread
| F/L Amps | 1.60 |
| Phase | Single |
| Type | Shaded Pole |
| Shaft Length | 2-1/4" |
| Diameter | 3-3/8" |
| Rot. | CWSE |
| Applications | Central heating and direct drive blower units in humid or dusty areas |
| Efficiency | 35.0% |
| A | 4-1/4" |
| Enclosure | TEFC |
| Speeds | 1 |
| Bearing Type | Slv |
| Thermal Protection | Yes |
| HP | 1/25 |
| Wt. Lbs. | 4.1 |
| Mounting | Thru-bolt |
| Insulation Class | B |
| Volts | 115 |
| Shaft Diam. | 5/16" |
| RPM | 1500 |
| Features | Shaded pole, thermally protected |Shaft: flatted |Cooling case may be removed if necessary to use as totally enclosed motor|Studs: four, 3/4" long on 2.84" centers, #8-32 thread |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 4.35 |
| Shipping Width | 4.30 |
| Shipping Length | 8.30 |
| Shipping Height | 4.60 |
| Harmonize Code | 8501.10.3000 |
See catalog page 9 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: D134
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
