A: 3-1/4"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 4-5/16"; Efficiency: 35.0%; Enclosure: OAO; F/L Amps: 1.80; HP: 1/20-1/60; Hz: 60; Insulation Class: A; Mfg. #: 364; Mounting: Resilient; Phase: Single; R: 4"; Rot.: Dbl. Shaft; RPM: 1550; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 8"; Speeds: 4; Std. Mount. Pos.: Horizontal Only; Thermal Protection: Auto; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 7.9;
| Store | Status |
| Login above to see availability | |
A: 3-1/4"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Diameter: 4-5/16"; Efficiency: 35.0%; Enclosure: OAO; F/L Amps: 1.80; HP: 1/20-1/60; Hz: 60; Insulation Class: A; Mfg. #: 364; Mounting: Resilient; Phase: Single; R: 4"; Rot.: Dbl. Shaft; RPM: 1550; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 8"; Speeds: 4; Std. Mount. Pos.: Horizontal Only; Thermal Protection: Auto; Type: Shaded Pole; Volts: 115; Wt. Lbs.: 7.9;
Will replace Trane, Dunham-Bush, York, American Standard, Fedders, Carrier, etc., in fan coil unit applications
Open ventilated, shaded pole, thermally protected |Shaft: flatted, same length at both ends |Studs: S87-425, none; S87-405, S87-407, S87-400 and S89-097, four 9/16" long on 3-7/8" centers, #8-32 thread on opposite lead end of motor
| F/L Amps | 1.80 |
| Phase | Single |
| Type | Shaded Pole |
| Shaft Length | 8" |
| Diameter | 4-5/16" |
| Rot. | Dbl. Shaft |
| Applications | Will replace Trane, Dunham-Bush, York, American Standard, Fedders, Carrier, etc., in fan coil unit applications |
| Efficiency | 35.0% |
| A | 3-1/4" |
| Enclosure | OAO |
| Speeds | 4 |
| Bearing Type | Slv |
| Thermal Protection | Auto |
| HP | 1/20-1/60 |
| Wt. Lbs. | 7.9 |
| Mounting | Resilient |
| Insulation Class | A |
| Volts | 115 |
| Shaft Diam. | 1/2" |
| RPM | 1550 |
| Features | Open ventilated, shaded pole, thermally protected |Shaft: flatted, same length at both ends |Studs: S87-425, none; S87-405, S87-407, S87-400 and S89-097, four 9/16" long on 3-7/8" centers, #8-32 thread on opposite lead end of motor |
| R | 4" |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 7.35 |
| Shipping Width | 4.80 |
| Shipping Length | 5.00 |
| Shipping Height | 27.40 |
| Harmonize Code | 8501.10.6020 |
See catalog page 110 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: 364
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
