A: 4-1/8"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Capacitor to Match: G21-930; Diameter: 5"; Efficiency: 65.0%; Enclosure: OAO; F/L Amps: 4.7; HP: 1/4-1/6; Hz: 60; Insulation Class: B; Mfg. #: D150; Mounting: Resilient/Thru Bolts; NEMA Frame: 42; Phase: Single; R: 5-1/8"; Rot.: Rev.; RPM: 1050; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 6"; Speeds: 3; Thermal Protection: Yes; Type: PSC; Volts: 115; Wt. Lbs.: 11.5;
| Store | Status |
| Login above to see availability | |
A: 4-1/8"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Capacitor to Match: G21-930; Diameter: 5"; Efficiency: 65.0%; Enclosure: OAO; F/L Amps: 4.7; HP: 1/4-1/6; Hz: 60; Insulation Class: B; Mfg. #: D150; Mounting: Resilient/Thru Bolts; NEMA Frame: 42; Phase: Single; R: 5-1/8"; Rot.: Rev.; RPM: 1050; Service Factor: 1.00; Shaft Diam.: 1/2"; Shaft Length: 6"; Speeds: 3; Thermal Protection: Yes; Type: PSC; Volts: 115; Wt. Lbs.: 11.5;
Unit heaters, furnace blower, fans and blowers |Open ventilated PSC motors designed as OEM replacement furnace blower/unit heater motors for Payne, Day & Night, Bryant, Reznor, Intertherm, Coleman, Janitrol, etc.
Thermally protected, capacitor leads with 1/4" flag terminals, reversing plug |Shaft: 2-1/2" flatted |Studs: three or four on 4.62" centers, 13/16" long, #10-32 thread, on shaft end of motor |Resilient rings: not included |Capacitor: not supplied, use G21-930
| Capacitor to Match | G21-930 |
| F/L Amps | 4.7 |
| Phase | Single |
| Type | PSC |
| Shaft Length | 6" |
| Rot. | Rev. |
| Diameter | 5" |
| Applications | Unit heaters, furnace blower, fans and blowers |Open ventilated PSC motors designed as OEM replacement furnace blower/unit heater motors for Payne, Day & Night, Bryant, Reznor, Intertherm, Coleman, Janitrol, etc. |
| Efficiency | 65.0% |
| A | 4-1/8" |
| Enclosure | OAO |
| Speeds | 3 |
| Bearing Type | Slv |
| Thermal Protection | Yes |
| HP | 1/4-1/6 |
| Wt. Lbs. | 11.5 |
| Mounting | Resilient/Thru Bolts |
| Insulation Class | B |
| Volts | 115 |
| Shaft Diam. | 1/2" |
| RPM | 1050 |
| Features | Thermally protected, capacitor leads with 1/4" flag terminals, reversing plug |Shaft: 2-1/2" flatted |Studs: three or four on 4.62" centers, 13/16" long, #10-32 thread, on shaft end of motor |Resilient rings: not included |Capacitor: not supplied, use G21-930 |
| R | 5-1/8" |
| NEMA Frame | 42 |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 11.70 |
| Shipping Width | 5.70 |
| Shipping Length | 15.60 |
| Shipping Height | 5.40 |
| Harmonize Code | 8501.40.3040 |
See catalog page 14 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: D150
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
