A: 6-5/8"; Agency Certification: UR; Ambient Operating Temp. (Celsius): 40; Bearing Type: Ball; Diameter: 3-3/8"; Efficiency: 65.0%; Enclosure: OPEN; F/L Amps: 0.7; HP: 1/9; Hz: 60; Insulation Class: B; Mfg. #: D412; Mounting: Thru-bolt; Phase: Single; Rot.: Rev.; RPM: 3000; Service Factor: 1.00; Shaft Diam.: 1/4"; Shaft Length: 3-3/4"; Speeds: 1; Thermal Protection: Yes; Type: PSC; Volts: 230; Wt. Lbs.: 5.5;
| Store | Status |
| Login above to see availability | |
A: 6-5/8"; Agency Certification: UR; Ambient Operating Temp. (Celsius): 40; Bearing Type: Ball; Diameter: 3-3/8"; Efficiency: 65.0%; Enclosure: OPEN; F/L Amps: 0.7; HP: 1/9; Hz: 60; Insulation Class: B; Mfg. #: D412; Mounting: Thru-bolt; Phase: Single; Rot.: Rev.; RPM: 3000; Service Factor: 1.00; Shaft Diam.: 1/4"; Shaft Length: 3-3/4"; Speeds: 1; Thermal Protection: Yes; Type: PSC; Volts: 230; Wt. Lbs.: 5.5;
All-angle mount |24V pilot duty safety switch |Sleeve bearing (except as noted) |5/16" shaft adapter included |With centrifugal safety switch |Thermal overload protector |Self-cooling |S88-384 is used in Economite, LSI/Miller and Mid-Continent gas units
| F/L Amps | 0.7 |
| Phase | Single |
| Type | PSC |
| Shaft Length | 3-3/4" |
| Diameter | 3-3/8" |
| Rot. | Rev. |
| Efficiency | 65.0% |
| A | 6-5/8" |
| Enclosure | OPEN |
| Speeds | 1 |
| Bearing Type | Ball |
| Thermal Protection | Yes |
| HP | 1/9 |
| Wt. Lbs. | 5.5 |
| Mounting | Thru-bolt |
| Insulation Class | B |
| Volts | 230 |
| Shaft Diam. | 1/4" |
| RPM | 3000 |
| Features | All-angle mount |24V pilot duty safety switch |Sleeve bearing (except as noted) |5/16" shaft adapter included |With centrifugal safety switch |Thermal overload protector |Self-cooling |S88-384 is used in Economite, LSI/Miller and Mid-Continent gas units |
| Service Factor | 1.00 |
| Hz | 60 |
| Shipping Weight | 5.60 |
| Shipping Width | 5.90 |
| Shipping Length | 13.70 |
| Shipping Height | 4.90 |
| Harmonize Code | 8501.40.3040 |
See catalog page 5 for additional notes and/or restrictions.
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures.
WHOLESALE ONLY - Identification is required of purchasers. Possession of Johnstone's catalog does not constitute an offer to sell by Johnstone or the right to purchase from us.
RETURNS - All returns are subject to a restocking charge.
Mfg. #: D412
Your Request is Processing ...
Your session is about to expire, would you like to continue?
Copyright © 2013 Johnstone Supply. All rights reserved.
This site is optimized for IE7 or later, Firefox, Chrome and Safari
